RethinkDB Python driver

Overview

What is RethinkDB?

RethinkDB is the first open-source scalable database built for realtime applications. It exposes a new database access model -- instead of polling for changes, the developer can tell the database to continuously push updated query results to applications in realtime. RethinkDB allows developers to build scalable realtime apps in a fraction of the time with less effort.

Installation

$ pip install rethinkdb

Note: this package is the extracted driver of RethinkDB's original python driver.

Quickstart

The main difference with the previous driver (except the name of the package) is we are not importing RethinkDB as r. If you would like to use RethinkDB's python driver as a drop in replacement, you should do the following:

from rethinkdb import r

connection = r.connect(db='test')

Blocking and Non-blocking I/O

This driver supports blocking I/O (i.e. standard Python sockets) as well as
non-blocking I/O through multiple async frameworks:

The following examples demonstrate how to use the driver in each mode.

Default mode (blocking I/O)

The driver's default mode of operation is to use blocking I/O, i.e. standard Python
sockets. This example shows how to create a table, populate with data, and get every
document.

from rethinkdb import r

connection = r.connect(db='test')

r.table_create('marvel').run(connection)

marvel_heroes = r.table('marvel')
marvel_heroes.insert({
    'id': 1,
    'name': 'Iron Man',
    'first_appearance': 'Tales of Suspense #39'
}).run(connection)

for hero in marvel_heroes.run(connection):
    print(hero['name'])

Asyncio mode

Asyncio mode is compatible with Python ≥ 3.5.

import asyncio
from rethinkdb import r

async def main():
    async with await r.connect(db='test') as connection:
        await r.table_create('marvel').run(connection)

        marvel_heroes = r.table('marvel')
        await marvel_heroes.insert({
            'id': 1,
            'name': 'Iron Man',
            'first_appearance': 'Tales of Suspense #39'
        }).run(connection)

        # "async for" is supported in Python ≥ 3.6. In earlier versions, you should
        # call "await cursor.next()" in a loop.
        cursor = await marvel_heroes.run(connection)
        async for hero in cursor:
            print(hero['name'])
    # The `with` block performs `await connection.close(noreply_wait=False)`.

r.set_loop_type('asyncio')

# "asyncio.run" was added in Python 3.7.  In earlier versions, you
# might try asyncio.get_event_loop().run_until_complete(main()).
asyncio.run(main())

Gevent mode

import gevent
from rethinkdb import r

def main():
    r.set_loop_type('gevent')
    connection = r.connect(db='test')

    r.table_create('marvel').run(connection)

    marvel_heroes = r.table('marvel')
    marvel_heroes.insert({
        'id': 1,
        'name': 'Iron Man',
        'first_appearance': 'Tales of Suspense #39'
    }).run(connection)

    for hero in marvel_heroes.run(connection):
        print(hero['name'])

gevent.joinall([gevent.spawn(main)])

Tornado mode

Tornado mode is compatible with Tornado < 5.0.0. Tornado 5 is not supported.

from rethinkdb import r
from tornado import gen
from tornado.ioloop import IOLoop

@gen.coroutine
def main():
    r.set_loop_type('tornado')
    connection = yield r.connect(db='test')

    yield r.table_create('marvel').run(connection)

    marvel_heroes = r.table('marvel')
    yield marvel_heroes.insert({
        'id': 1,
        'name': 'Iron Man',
        'first_appearance': 'Tales of Suspense #39'
    }).run(connection)

    cursor = yield marvel_heroes.run(connection)
    while (yield cursor.fetch_next()):
        hero = yield cursor.next()
        print(hero['name'])

IOLoop.current().run_sync(main)

Trio mode

from rethinkdb import r
import trio

async def main():
    r.set_loop_type('trio')
    async with trio.open_nursery() as nursery:
        async with r.open(db='test', nursery=nursery) as conn:
            await r.table_create('marvel').run(conn)
            marvel_heroes = r.table('marvel')
            await marvel_heroes.insert({
                'id': 1,
                'name': 'Iron Man',
                'first_appearance': 'Tales of Suspense #39'
            }).run(conn)

            # "async for" is supported in Python ≥ 3.6. In earlier versions, you should
            # call "await cursor.next()" in a loop.
            cursor = await marvel_heroes.run(conn)
            async with cursor:
                async for hero in cursor:
                    print(hero['name'])

trio.run(main)

The Trio mode also supports a database connection pool. You can modify the example above
as follows:

db_pool = r.ConnectionPool(db='test', nursery=nursery)
async with db_pool.connection() as conn:
    ...
await db_pool.close()

Twisted mode

from rethinkdb import r
from twisted.internet import reactor, defer

@defer.inlineCallbacks
def main():
    r.set_loop_type('twisted')
    connection = yield r.connect(db='test')

    yield r.table_create('marvel').run(connection)

    marvel_heroes = r.table('marvel')
    yield marvel_heroes.insert({
        'id': 1,
        'name': 'Iron Man',
        'first_appearance': 'Tales of Suspense #39'
    }).run(connection)

    cursor = yield marvel_heroes.run(connection)
    while (yield cursor.fetch_next()):
        hero = yield cursor.next()
        print(hero['name'])

main().addCallback(lambda d: print("stopping") or reactor.stop())
reactor.run()

Misc

To help the migration from rethinkdb<2.4 we introduced a shortcut which can easily replace the old import rethinkdb as r import with from rethinkdb import r.

Run tests

In the Makefile you can find three different test commands: test-unit, test-integration and test-remote. As RethinkDB has dropped the support of Windows, we would like to ensure that those of us who are using Windows for development can still contribute. Because of this, we support running integration tests against Digital Ocean Droplets as well.

Before you run any test, make sure that you install the requirements.

$ pip install -r requirements.txt
$ make prepare

Running unit tests

$ make test-unit

Running integration tests

To run integration tests locally, make sure you intstalled RethinkDB

$ make test-integration

Running remote integration tests

To run the remote tests, you need to have a Digital Ocean account and an API key.

Remote test will create a new temporary SSH key and a Droplet for you until the tests are finished.

Available environment variables

Variable name	Default value
DO_TOKEN	N/A
DO_SIZE	512MB
DO_REGION	sfo2

$ pip install paramiko python-digitalocean
$ export DO_TOKEN=<YOUR_TOKEN>
$ make test-remote

Contributing

Hurray! You reached this section which means, that you would like to contribute. Please read our contributing guide lines and feel free to open a pull request.

Dependencies of rethinkdb (2).
Dependency	Optional
looseversion	false
six	false

Package profile

rethinkdb

Releases

Release table

PyPI Downloads

Dependencies

Details

Project URLs

Dependencies

Package description